The 304 stainless steel mirror 8K plate has a finish of more than 8k mirror surface, which is the best choice for bathroom products, star hotel decoration, clothing display cabinets, electrical equipment, and case shells.
It is a fine product in stainless steel. First of all, the 304 material 2B surface is used as the bottom plate, and the stainless steel plate surface is ground with a polishing device until it is polished into a mirror surface.
First of all, it is necessary to prepare the grinding fluid, mix water, nitric acid, and iron red powder according to a certain ratio, and then put it on the machine to proceed forward. For rough polishing, the grinding wheel is generally used: 80#120#240#320#400#600# is arranged in order from coarse to fine. (Note: 80# is thicker) This process is generally ground with clean water.
Generally, six groups of grinding machines are used, mainly to remove rough surfaces, burrs, trachoma, etc., with a certain depth, probably within 2c.
The surface is: fine sanding, already has a certain brightness! Then began to polish finely. It is necessary to use machine wool felt. The higher the density, the better. This process uses water, nitric acid and iron powder to grind. Generally, ten groups of grinders are used. There is no depth to speak, mainly to remove the surface oxide layer, sand holes, rough grinding head flower. After 16 groups of grinding machines, the stainless steel 8K plate is here.
It can be washed and dried after coming out: this process is cleaned with clean water, the finer the brush, the better the water, the cleaner the washed product, then the baking lamp is used for drying, and the quality is checked after drying: Check the brightness, the amount of trachoma, the presence or absence of peeling lines, dark bones, scratches, whether the product is deformed, and whether the grinding head flowers are within the control range. Packing with protective film: This process is mainly for finished products that meet the standard.
Requirement: The protective film should be flat, without leaking edges, cut neatly, and then can be packed in boxes!
![How to do 304 stainless steel mirror and 8K mirror stainless steel plate?]()