Poor stainless steel backing paper / A batch of stainless steel flat plates purchased by customers found that the backing paper between each steel plate was folded and shrunk during use, which did not play a good role in protection and caused inconvenience to the board removal operation , So file a quality objection. This batch of flat plates is made by Kaiping equipment of the company. Kaiping equipment of the company adopts more advanced electrostatic paper loading technology. For underlaying paper, the stacking board adopts wind blowing pallet technology. The equipment has been in operation for several years and the quality of the pad paper has always been relatively good. During the Kaiping process, the device did not find any abnormalities, and the device parameter settings were normal. Observe the quality of the pad paper of these batches of tablets. Some of the paper is folded, and some of the paper does not cover the bottom of the board very well. These problems generally occur when the pallet is transported during opening and shearing. It was preliminarily determined that the paper and the tablet were not adhered firmly when the paper was electrostatically loaded. By observing these pads, you can feel that the paper is somewhat damp. Checking the date of this batch of paper, I know that this batch of paper is Kaiping recycled paper. At that time, the date of recycling was just right during the rainy season, and the humidity was high, so this batch of paper was a little damp. If the paper is not dry enough, the adhesion force generated during the electrostatic paper loading process is very small, so the board and paper will separate. Because the thickness of these tablets is 1.5mm, the poor paper backing has no effect on the tablet itself, but be careful of scratches during use. For customers, certain compensation will be given to the sales price. In order to prevent this from happening again, the paper roll can be placed in an oven and heated at 100°C for 24 hours before use.