Bumps on the edges of stainless steel flat plates/A batch of stainless steel flat plates purchased by customers was found to have scratch marks on the edges when unpacking and used, so the quality objection was raised. Through the on-site inspection, the customer said that there are a total of flat boxes with scratch marks. Because the wooden frame is packed with moisture-proof paper, it is difficult to observe the scratch marks before unpacking. There are two points on the edge of the steel plate that are convex and folded, and there is a high possibility of collision. Carefully inspect the moisture-proof paper used for packaging, and there are also scratches on the corresponding parts. Considering that there are two locations of the injury, and by measuring the distance, it is inferred that it is likely that the forklift occurred during the shipment. The survey results also validate this inference. It turned out that when the forklift worker was temporarily involved in the shipment, it was operated by another employee. The employee lacked operating experience and decelerated too slowly when approaching the truck. A box of steel plates on the forklift arm was installed on the truck and was injured. It is caused by the trailing arm in front of the forklift. Replace the stainless steel plates of qualified quality with customers. Forklift workers are special types of work, and must hold a certificate to work. The employee who operated the forklift did not have a forklift operation certificate, which ultimately caused the company to suffer losses and was punished according to the regulations. At the same time, the original forklift operator was also punished. As a special forklift operator, the forklift start key should be kept without authorization. , Shall not be handed over to other employees for operation.